Track loader repairs

1 Apr 2021
1 707 291 Aufrufe

Working on a 1960's Caterpillar 955h crawler loader:
0:00 bring in garage
1:29 New top roller
4:57 Remove exhaust elbow
14:13 new seat
22:05 Install new exhaust elbow
23:45 Demonstrate bad starter
25:20 Install muffler
27:18 remove starter to get rebuilt
31:46 Demonstrate roller not turning
33:11 Engine oil change
35:35 digging in shale
45:41 Make exhaust gasket
49:10 more digging, also using a Ex100 excavator, Cat 950 wheel loader, and Takeuchi TL12 compact track loader
Ebay roller listing: (the winning bidder refused to pay) www.ebay.com/itm/184739763847

KOMMENTARE
  • OK, I think he made some bitcoin loot. Good investing, BTW. So many machines it's a construction company.

    Shakdi DagalimalShakdi DagalimalVor Stunde
  • Engine cover needs a chain hoist to lift it off and on. *IT'S A MONSTER MACHINE*

    Shakdi DagalimalShakdi DagalimalVor Stunde
  • Is the roller still for sale? I see that the winning bidder refused to pay.

    DasdfjklDasdfjklVor 2 Stunden
  • nice loader

    Pople BackyardFarmPople BackyardFarmVor 19 Stunden
  • Am I the only one who had an advertisement every 2 minutes and 30 seconds for the whole video... I understand ads but that many...

    Whos AskinWhos AskinVor Tag
  • Very nice video

    Ronnie VenhorstRonnie VenhorstVor Tag
  • You should Pixel the Flash at the welding on every Video whats out right now, this is eyes Killer , someone get the idea to indict you ,because he watch youre Videos and look right into the Flash without a warning before starting or Pixeld the Flash and have problems with eyes. You should do that right away. But nice Video and with a good running time, for me it could be longer 💪👍

    Florian ProbstFlorian ProbstVor Tag
    • The flash you see won't ever hurt your eyes, because a video camera and a monitor or smartphone screen will never be able to reproduce the bright flash of an arc weld, because the brightest a screen can get is pure white, thats the backlight color of the light source of a screen. If you're standing nearby a welder without eye protection, that will hurt your eyes, so the smartphone screen acts as a protection, because it limits the light that gets to your eyes.

      Markus K.Markus K.Vor Tag
  • As many people watch your videos I’m shocked no power tool company’s have sent out tools to Andrew for free advertising

    jakehill322jakehill322Vor Tag
  • Блин...по ходу я единственный русский ,который смотрит это...

    КАСТЯН ЛЕМАННКАСТЯН ЛЕМАННVor Tag
  • Always a pleasure watching your channel I'm confined now and the long sleep is near.. watching you sir is priceless

    william millerwilliam millerVor 2 Tage
  • My thumbs up is for the dog scene.

    guyguyVor 2 Tage
  • How do you heat and cool the castle Mr. Camarata?

    william millerwilliam millerVor 2 Tage
  • Where can I get a pair of scissors like that, they are just fantastic.

    Patrick JoycePatrick JoyceVor 2 Tage
  • mountain, goodbye!

    Павел СлесарьПавел СлесарьVor 2 Tage
  • John Deere backhoe can you fix the windshield?

    Marauder MitchelliMarauder MitchelliVor 3 Tage
    • J6n

      Jeider MendozaJeider MendozaVor 2 Tage
    • @Andrew Camarata I know you don’t like the backhoe...who does seems excavators rule the world. Years ago we discussed meeting to off-road ride, I just purchased a rzr pro and an excavator. Stay healthy your videos are awesome 🙂

      Marauder MitchelliMarauder MitchelliVor 2 Tage
    • can, yes? But its not worth it, almost every piece of glass is missing in that thing.

      Andrew CamarataAndrew CamarataVor 3 Tage
  • So many Toys

    J. A.J. A.Vor 3 Tage
  • 👍💪💪💪💪💪💪👍💐

    paulus oumatapaulus oumataVor 3 Tage
  • What about some cover for the heavy vehicles? that would stop plenty of the deterioration.

    Aitor BledaAitor BledaVor 3 Tage
  • Might want to take a couple of pics of your wiring diagram in case it ever gets rubbed off.

    K WilliamsonK WilliamsonVor 4 Tage
  • Is it just me - or was anyone else waiting for him to knock that boulder off the hill?!! Lol

    cnote4461cnote4461Vor 4 Tage
    • U6u66

      Mestafa EssafiMestafa EssafiVor 3 Stunden
  • Man I just love how theres timeline titles or whatever you want to call them. Makes it so easy to know where you left off. Where you want to go to. More tubers need to follow your lead Andrew

    Seth WellsSeth WellsVor 4 Tage
  • "I gotta stop breaking stuff at some point." LOL, me just before I take something to a professional. It was cathartic seeing someone blow right past the point of no return and actually finish it. Usually I take my stuff to a shop, smh.

    Brandon StineBrandon StineVor 4 Tage
  • Make some garage for all that equipment.

    Prince HarambePrince HarambeVor 4 Tage
  • Everything on big rigs and machinery requires big expensive tools. Some ordinary automobile tools will work, but they will show there limitations. It's a paradigm shift in scale. There are similarities between RVs and Commercial Trucks. Especially the braking systems. Servicing and repairing brakes on them is no joke! They have to control a lot of weight! RV owners and big rig operators do not have a choice and pay a premium for those repairs. Because your quality is what they depend on...and they are liable. Most automobile shops won't touch them. Because additional liability insurance, licenses, and certification are required. No big deal: just take the course, test, and pay the fee. THEN ....With a few specialized tools and, possibly, a two hoist lift, you can EARN A LOT OF MONEY! That's just the "price of rice". Maybe a cool gig in the winter months? ...pay for a herd of jet skiis and snowmobiles... and some Bling for yir dog... Just saying.

    WAVETUBE84WAVETUBE84Vor 4 Tage
  • the pivot pins of the bucket seem to be loose. should be checked if the bushings are worn out or even still in place. otherwise it will get nasty and/or expensive.....

    Andreas PflügerAndreas PflügerVor 4 Tage
  • Good job! Keep it up!

    Joe LaughlinJoe LaughlinVor 4 Tage
  • I've never seen that trick with the paper towel. Nice!

    formerartstudentformerartstudentVor 4 Tage
  • I knew a man once who drove a Screw driver in like that to remove a top carrier and when the screw driver came back out Itwent completely through his head killing him instantly. Think about it. There is a better way

    Joe KirkJoe KirkVor 4 Tage
  • Nice equipment...fixing the tracks....cool runnings.

    John TatumJohn TatumVor 4 Tage
  • Fixed just in time to buy 2 more.

    Gizmo42RodeoGizmo42RodeoVor 4 Tage
  • 😂 you had to change the oil to get that roller working Andrew ! That crazy 😜 oh well it’s at least working great 👍

    Joel LosoyaJoel LosoyaVor 5 Tage
  • Хорош Катерок! :)

    Павел ГлушковПавел ГлушковVor 5 Tage
  • Holy shit!, the roller sold for over 15K O_O

    ARXXIIIARXXIIIVor 5 Tage
  • never mind my initial comment...I see the bend you added.

    doug westacottdoug westacottVor 5 Tage
  • Andrew.. maybe add a flapper of the end of the muffler pipe. Keeps the rain/snow out

    doug westacottdoug westacottVor 5 Tage
  • This mans wrench is bigger than yours ... lmao . Love to watch this channel. Learn from the best, stay away from the rest :-)

    bea kittelscherzbea kittelscherzVor 5 Tage
  • Hackie hack hack!

    GeneGeneVor 5 Tage
  • Some guy with Bones N' Sleeves put a gag reel of your greatest bloopers, or just bloopers anyway and I loved it. If you ever feel like do that I would be sure to share. Hilarious.

    Bruce MacGlynnBruce MacGlynnVor 5 Tage
  • Gud tip for siezed bolts is to get them red as close to where their threaded in then pour cold water on them. Water should boil thru the thread cleaning it out.

    Deplorable IrishDeplorable IrishVor 5 Tage
  • Great video always like to see folks doing some wrenching,you want to get some gold pans and test to see if there is gold in that shale ,it’s a perfect place 👍👍

    Rusty AxleRusty AxleVor 5 Tage
  • When you heat a bolt. YOU GOTTA LET IT COOL! Its in a hole. it gets hot, it expands. the hole forces it to get longer not fatter. when bolt cools it shrinks. it is now longer and skinnier than it was before. rinse repeat once or twice. cool it with air or penetrating oil like pb blaster. THEN you loosen it up. itll come right out...or itll break. lol

    Diesel RamchargerDiesel RamchargerVor 5 Tage
  • Dude youve got to get yourself a crimp on hose clamp set. For fixing air lines, ac hoses etc. super low profile. entire set with crimpers is like 25 bucks. Do It! That bulky mess on your air hose is dog poop. Crimp on clamp. heat shrink it or slide a piece of hose over it and voila no scratch on them perdy tractors. lmao.

    Diesel RamchargerDiesel RamchargerVor 5 Tage
  • Good👍😀

    Kazam CafoKazam CafoVor 5 Tage
  • Always tap or clean a hole by hand, never with a special drill meant for this.

    Robert LishmanRobert LishmanVor 5 Tage
  • 15,200 for the roller.... someone actually bid that high!! So the 15,100 bidder got it? you should start selling all kinds of goofy stuff and signing it. the world is full of suckers.

    G MG MVor 6 Tage
  • A little ruff on the equipment are you now

    wirenut003wirenut003Vor 6 Tage
  • 33:55 so glad to see you wearing eye protection while changing that oil. Just a few days ago I was changing oil as well and it splashed right in my eye. I was lucky not to get blinded or something by that. Learned my lesson for sure

    Akotski1338Akotski1338Vor 6 Tage
  • When this video came out I watched and the that same day I found an old abandoned cat that was way bigger than that one and it had the same exhaust setup which was pretty cool.

    Akotski1338Akotski1338Vor 6 Tage
  • I watched this video at a hotel tv because I was on vacation but I’m going to watch it again on my phone because I liked the video so much

    Akotski1338Akotski1338Vor 6 Tage
  • What a hack that guy is xD so glad to never run in to him or to have anything to do with him or his "company"

    ________________________Vor 6 Tage
  • Andrew you have shown me a nice trick with the spanner thanks very much

    Eliot HeasmanEliot HeasmanVor 6 Tage
  • i don't know was there a gasket between turbo flange and exhaust manifold ? maybe could have been little quieter because you added the silencer. I saw little smoke come out there that's why i wondered.

    MEMeOpMEMeOpVor 6 Tage
  • When the vehicles got lined up at the end it reminded me of construction simulator :) Great video as ever!

    NewbFixerNewbFixerVor 6 Tage
  • Well if I were you I would stick to mec. work and leave the dirt work to your wife. . Rob.

    Robin FrazierRobin FrazierVor 6 Tage
  • love the paper towel trick!

    pzavada1pzavada1Vor 6 Tage
  • *_Oh.Great.The giant machine worked too well.I love these machines !_*

    Machinery AmazingMachinery AmazingVor 6 Tage
  • Andy you should have put some wood preserver on the seat backs that climate you have they will rot in a few months clad to help great vids by the way me in u.k.

    alan clarke clarkealan clarke clarkeVor 6 Tage
  • “Alright...look at that!” - Andrew

    George EnriquezGeorge EnriquezVor 7 Tage
  • What is the heavy ticking noise when you load the motor? Is it an age thing or is everything just fine?

    John WJohn WVor 7 Tage
  • I really appreciate that paper towel in the wrench trick. I’m going to buy an AC mug or a t-shirt just for that!

    Joanne FJoanne FVor 7 Tage
  • As far as the rocks go--------- i'd put one at the top of your driveway and install a tall parking lot lamp and the same on the Sharp curve

    basic186basic186Vor 7 Tage
  • E muito bom assistir seus videos aqui no Brasil nao tem os equipamentos que tem ai abraço tudo de bom se cuida!

    marko antonyomarko antonyoVor 7 Tage
  • Why don paint the sit base

    alfa LOZANOalfa LOZANOVor 7 Tage
  • Great great work 👉👍🆒💖🚜👀

    Tractors & Machines ROTractors & Machines ROVor 7 Tage
  • With teeth that wheel loader would bite full scoops fast, impressive power!

    Rigid ReviewRigid ReviewVor 7 Tage
  • "Birthday present for a 6-year-old" "can roll it around the bedroom or something" 😆😆😆🤣🤣

    Nick ShadesNick ShadesVor 7 Tage
    • @EPICRANDOMGUY 02 nah, it just people bidding, they didn't want to pay that

      Bagheera TubeBagheera TubeVor 6 Tage
    • Just looked on eBay, it sold for $15000 🤯

      EPICRANDOMGUY 02EPICRANDOMGUY 02Vor 6 Tage
    • Sounds like he does not have kids xD

      Bagheera TubeBagheera TubeVor 7 Tage
  • How does an oil change make the roller work?

    Andjuju 64Andjuju 64Vor 7 Tage
  • Tom from Delaware Was wondering if you were ever going to show the finished product of the upstairs Or did I miss it

    Thomas LeonardThomas LeonardVor 8 Tage
  • Andrew a ‘Self Made Man’ ! True example of ‘can do’ American Spirit, so sadly missing among our youth today !

    highwatercircutriderhighwatercircutriderVor 8 Tage
  • Every time I watch this guy do something I'm reminded, Rust is Real!

    deals from virginiadeals from virginiaVor 8 Tage
  • I honestly wouldn’t mind seeing him finally fix the John Deere backhoe. Make it reliable

    online game southonline game southVor 8 Tage
    • You have a valid point.

      online game southonline game southVor 8 Tage
    • The trick is to not use that thing. Other wise its going to break.

      Andrew CamarataAndrew CamarataVor 8 Tage
  • That exhaust housing on that turbo is a strange design. I'm not familiar with dozens or whether that's a common design or not. It's like a press fit buts it's too loose to be a press fit. So what actually seals it. Does it only seal once it gets hot and then it locks in place permanently??

    MICHAEL CHRISTOPHERMICHAEL CHRISTOPHERVor 8 Tage
  • I don't know what it is about Andrew's videos, but I can sit and watch hours of his footage! As always, great content....

    Elwin_T JusticeElwin_T JusticeVor 8 Tage
  • I cried when he cut the hood. If it was me I would have added some pipe to the muffler

    Wes KWes KVor 8 Tage
  • That hand crane in the shop is awesome! I really want one that will move like that in my barn

    tenagestrtenagestrVor 8 Tage
    • Yes, I use it often. There is a video on here of building it.

      Andrew CamarataAndrew CamarataVor 8 Tage
  • "I guess I should of cleaned those leaves out" as the whole loader is on fire lol

    Team DesmarchaisTeam DesmarchaisVor 9 Tage
  • Always enjoy your work and videos. I'm sure you have an angle die grinder. Pop a conditioning disk on that baby and all the nooks and crannies will be easier to reach. Who hasn't nearly torched their dozer with a spring leaf fire? Was wondering if a 6” extension would have been better than cutting the hood? Thanks for all your work

    Captain Over-TightenCaptain Over-TightenVor 9 Tage
  • ع

    حيدر شلوححيدر شلوحVor 9 Tage
  • Always a good video, little torch and welder tune is always good,keep em coming, I just started a channel with my daughter, but hoping she'll take it over when shes older

    Life with Lilah MarieLife with Lilah MarieVor 9 Tage
  • Just a note, you should always heat around the bolt and keep the bolt as cool as possible, you want the steel that the bolt is screwed into to expand and the bolt to stay strong. Just an observation not a criticism.

    Tom OverholtTom OverholtVor 9 Tage
  • “Is that gonna go out or is that a problem”

    Dane HansenDane HansenVor 9 Tage
  • More than 15 commercial Breaks? Dude youre getting greedy

    Tommy EssTommy EssVor 10 Tage
  • Why can’t you use some of that broke up shale for fill or drive ways

    Jim MorwoodJim MorwoodVor 10 Tage
  • You are such an idiot when it comes to maintaining your equipment..and you are careless..no wonder you have to have a you tube channel bro pay for your parts...lmao

    Big mikeBig mikeVor 10 Tage
  • Andrew, have you noticed the crack on the lower right loader arm? See one of your previous videos (timestamped) for location details: dehave.info/down/o3x0p9mVpaHLypw/video

    Duncan AitkenDuncan AitkenVor 10 Tage
  • A green Caterpillar ... who was painting that?

    rkalle66rkalle66Vor 10 Tage
  • If a tunnel boring machine pops up for sale on FB marketplace - i expect to see it on this channel..

    kctyphoonkctyphoonVor 10 Tage
  • Andrew Camarata , that rock you dug out or a nicer one! You should have one engraved with your own company name and put it down by the road. 🧐 then you could offer them to other people too, engrave them and place them where they want them. Just a thought 💭 Gus !

    Kurt McCarthyKurt McCarthyVor 10 Tage
  • Nice video Andrew it is interesting to see when you do this fixing up videos. Like see things come to life again :P Keep up the good work. Greatings from Sweden.

    Hans kristian KnudsenHans kristian KnudsenVor 10 Tage
  • Garage and workshof completed tool room Very strong tractor Caterpillar Good konten brother Your friend from 🇮🇩🙏🙏

    pakmude crewpakmude crewVor 10 Tage
  • Dear friend, Peace from Israel, the Holy Land, As always, fun to watch you, you are a professional man, I love your dogs are very kind, have you thought about making a concrete floor or tar outside for all tractors, I think you will be perfect, also will not have mud, good luck.

    rece1000rece1000Vor 10 Tage
  • The last starter replacement required a skid steer to pull it out. This shows off finesse.

    Carl SuttonCarl SuttonVor 10 Tage
  • The tracks on the 955 are on the wrong way around, Andrew. The pin bushings on each link should be leading, i.e. towards the front idler. Nice to see the old girl getting a bit of attention.

    Ian BarnesIan BarnesVor 10 Tage
  • you should wash the machine before repairs, bro

    Vinh NguyễnVinh NguyễnVor 10 Tage
  • Zacem katok vybrasil nada byla podshipniki pomieniat. Burzui mnogo tehniki imeesh, nada tebe raskulacit. Liudi nieponimaet gavari pa ruski.

    Gediminas StankūnasGediminas StankūnasVor 10 Tage
  • Hey andrew 1 nice Tip for ya and a video to do. Install Poles for electricity with DC 12-24 Battery chargers witch cabels for your Machines :) you can have a meter in the garage for the voltages and or shutoff.

    Break The WarriorBreak The WarriorVor 10 Tage
  • The rollers got unstuck :P that's heat for ya on greezy bearings :D

    Break The WarriorBreak The WarriorVor 10 Tage
  • 항상 열심히 무엇이든 잘 고치는 군요

    박동하박동하Vor 10 Tage
  • MB mmm

    ASUBRAMANI SUBRAMANIASUBRAMANI SUBRAMANIVor 11 Tage
  • im impressed that her get up and go hasnt got up and left

    jakezarkjakezarkVor 11 Tage
DEhave